Lexus ES: Driving
Lexus ES (XZ10) Owner's Manual / Driving
- Before driving
- Driving procedures
- Operating the lights and wipers
- Refueling
- Using the driving support systems
- Lexus Safety System + 2.0
- PCS (Pre-Collision System)
- LTA (Lane Tracing Assist)
- RSA (Road Sign Assist)
- Dynamic radar cruise control with full-speed range
- BSM (Blind Spot Monitor)
- Driving Mode Select switch
- PKSA (Parking Support Alert)
- Intuitive parking assist
- RCTA (Rear Cross Traffic Alert) function
- RCD (Rear Camera Detection) function
- PKSB (Parking Support Brake)
- Parking Support Brake function (static objects)
- Parking Support Brake function (rear-crossing vehicles)
- Parking Support Brake function (rear pedestrians)
- Driving assist systems
- Driving tips
READ NEXT:
Driving the vehicle
The following procedures should be
observed to ensure safe driving:
Driving procedure
■ Driving
1. With the brake pedal depressed,
shift the shift lever to D.
2. If the parking brake is in m
Cargo and luggage
Take notice of the following information
about storage precautions,
cargo capacity and load:
WARNING
■Things that must not be carried in the
trunk
The following things may cause a fire if
loa
SEE MORE:
Disassembly
DISASSEMBLY CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during rear door removal/installation are shown below. Necessary Procedure After Parts Removed/Installed/R
Remote Service Malfunction
PROCEDURE 1. CHECK CAN COMMUNICATION SYSTEM (a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Bus Check. Click here (e) Check that all ECUs and sensors that use CAN communication are connected. Resul
© 2016-2026 Copyright www.lexguide.net
