Lexus ES: Operating the lights and wipers
Lexus ES (XZ10) Owner's Manual / Driving / Operating the lights and wipers
READ NEXT:
Headlight switch
The headlights can be operated
manually or automatically.
Turning on the headlights
Operating the switch turns on
the lights as follows:
U.S.A.
Canada
The side
marker, parking
Automatic High Beam
The Automatic High Beam uses an
in-vehicle camera sensor to assess
the brightness of streetlights, the
lights of vehicle ahead, etc., and
automatically turns the high beam
on or off as necessary.
Windshield wipers and washer
Operating the lever can switch
between automatic operation and
manual operation, or can use the
washer.
NOTICE
■When the windshield is dry
Do not use the wipers, as they may damage
the windsh
SEE MORE:
Tilt and Telescopic Manual Switch Circuit
DESCRIPTION Different voltage values are sent to the multiplex tilt and telescopic ECU by operating the tilt and telescopic switch. The multiplex tilt and telescopic ECU then judges which motor and in which direction that motor should operate based on the voltage value. WIRING DIAGRAM PROCEDURE
Evaporative Emission System Pressure Sensor/Switch Circuit Short to Ground (P045011,P045015,P04502A,P04502F)
DTC SUMMARY DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note P045011 Evaporative Emission System Pressure Sensor/Switch Circuit Short to Ground EVAP pressure less than 42.11 kPa(abs) [6.11 psi(abs)] for 0.5 seconds.
Canister pump module
Wire h
© 2016-2026 Copyright www.lexguide.net
