Lexus ES: Dynamic Radar Cruise Control System (for Hv Model)
Lexus ES (XZ10) Service Manual / Engine & Hybrid System / Cruise Control / Dynamic Radar Cruise Control System (for Hv Model)
- Precaution
- Definition Of Terms
- Parts Location
- System Diagram
- How To Proceed With Troubleshooting
- Road Test
- Operation Check
- Problem Symptoms Table
- Terminals Of Ecu
- Diagnosis System
- Dtc Check / Clear
- Freeze Frame Data
- Fail-safe Chart
- Data List / Active Test
- Diagnostic Trouble Code Chart
- Vehicle Control History
- Brake Switch "A" Circuit Open (P057113)
- Brake Switch "A" Signal Compare Failure (P057162)
- Brake Switch "A" Signal Compare Failure (P057162)
- Cruise Control System Internal Failure (P057504,P057549)
- Brake System (P157800)
- Cruise Control Input Processor (P160700)
- Communication Error from VSC to ECM Invalid Serial Data Received (P163081)
- Communication Error from ECM to VSC Invalid Serial Data Received (P163181)
- Lost Communication with Cruise Control Module Missing Message (U010487,U012287,U029387)
- Lost Communication with Multi-axis Acceleration Sensor Module Missing Message (U012587,U012687,U012987,U015587,U029387,U110687)
- Lost Communication with Cruise Control Front Distance Range Sensor Single Sensor or Center Missing Message (U023587)
- Internal Control Module Software Incompatibility Not Programmed (U030051)
- Internal Control Module Software Incompatibility Invalid/Incompatible Software Component (U030057)
- Software Incompatibility with Brake System Control Module Not Programmed (U031851)
- Software Incompatibility with Brake System Control Module Invalid/Incompatible Software Component (U031857)
- Software Incompatibility with Body Control Module Not Programmed (U032251)
- Software Incompatibility with Body Control Module Invalid/Incompatible Software Component (U032257)
- Invalid Data Received from Hybrid Powertrain Control Module Invalid Serial Data Received (U059481)
- Steering Pad Switch Circuit
- Distance Control Switch Circuit
- Cruise Main Indicator Light Circuit
- Cruise SET Indicator Light Circuit
READ NEXT:
Precaution
PRECAUTION PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL NOTICE: When disconnecting the cable from the negative (-) auxiliary battery terminal, initialize the following s
Definition Of Terms
DEFINITION OF TERMS Term Definition Monitor description Description of what the hybrid vehicle control ECU monitors and how it detects malfunctions (monitoring purpose and details). Rel
Parts Location
PARTS LOCATION ILLUSTRATION *1 MILLIMETER WAVE RADAR SENSOR ASSEMBLY *2 FORWARD RECOGNITION CAMERA *3 BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY - SKID CONTROL ECU *4 BRAKE ACTUAT
SEE MORE:
License Plate Light Assembly
ComponentsCOMPONENTS ILLUSTRATION *1 LICENSE PLATE LIGHT ASSEMBLY - - RemovalREMOVAL CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE 1. REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-A
Installation
INSTALLATION PROCEDURE 1. INSTALL LEAK DETECTION PUMP SUB-ASSEMBLY HINT: Only perform this procedure when replacement of the leak detection pump sub-assembly is necessary. (a) Engage the 2 claws to install a new leak detection pump sub-assembly to the No. 2 charcoal canister sub-assembly. NOTIC
© 2016-2026 Copyright www.lexguide.net
