Lexus ES manuals

Lexus ES: Lost Communication with Multi-axis Acceleration Sensor Module Missing Message (U012587,U012687,U012987,U015587,U029387,U110687)

Lexus ES (XZ10) Service Manual / Engine & Hybrid System / Cruise Control / Dynamic Radar Cruise Control System (for Hv Model) / Lost Communication with Multi-axis Acceleration Sensor Module Missing Message (U012587,U012687,U012987,U015587,U029387,U110687)

DESCRIPTION

The forward recognition camera communicates with each sensor and ECU via CAN communication.

If any malfunction is detected in a CAN communication circuit, one or more CAN communication system DTCs are stored.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

MIL

DTC Output from

U012587

Lost Communication with Multi-axis Acceleration Sensor Module Missing Message

When the vehicle speed is 1 km/h or more, a communication error between the forward recognition camera and yaw rate and acceleration sensor (airbag ECU assembly) continues for 5 seconds or more.

  • CAN communication system
  • Yaw rate and acceleration sensor (Airbag ECU assembly)
  • Forward recognition camera

Does not come on

Forward recognition camera

U012687

Lost Communication with Steering Angle Sensor Module Missing Message

When the power switch is on (IG) for 2 seconds or more, a communication error between the forward recognition camera and steering sensor continues for 5 seconds or more.

  • CAN communication system
  • Steering sensor
  • Forward recognition camera

Does not come on

Forward recognition camera

U012987

Lost Communication with Brake System Control Module Missing Message

When the power switch is on (IG) for 2 seconds or more, a communication error between the forward recognition camera and skid control ECU (brake booster with master cylinder assembly) continues for 5 seconds or more.

  • CAN communication system
  • Skid control ECU (brake booster with master cylinder assembly)
  • Forward recognition camera

Does not come on

Forward recognition camera

U015587

Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message

When the power switch is on (IG) for 2 seconds or more, a communication error between the forward recognition camera and combination meter assembly continues for 50 seconds or more.

  • CAN communication system
  • Combination meter assembly
  • Forward recognition camera

Does not come on

Forward recognition camera

U029387

Lost Communication with Hybrid Powertrain Control Module Missing Message

When the dynamic radar cruise control system is operating, a communication malfunction between the hybrid vehicle control ECU and forward recognition camera is detected for 5 seconds or more.

  • CAN communication system
  • Hybrid vehicle control ECU
  • Forward recognition camera

Does not come on

Forward recognition camera

U110687

Lost Communication with Electric Parking Brake Module Missing Message

When the power switch is on (IG) for 2 seconds or more, a communication error between the forward recognition camera and parking brake ECU (brake actuator assembly) continues for 5 seconds or more.

  • CAN communication system
  • Parking brake ECU (Brake actuator assembly)
  • Forward recognition camera

Does not come on

Forward recognition camera

PROCEDURE

1.

CHECK FOR DTCs

(a) Clear the DTCs.

Powertrain > Radar Cruise2 > Clear DTCs

(b) Make sure that the DTC detection conditions are met.

HINT:

If the detection conditions are not met, the system cannot detect the malfunction.

(c) Check for DTCs.

Powertrain > Radar Cruise2 > Trouble Codes

Result

Proceed to

DTC U012587, U012687, U012987, U015587, U029387 and U110687 are not output

A

DTC U012587, U012687, U012987, U015587, U029387 or U110687 is output

B

A

USE SIMULATION METHOD TO CHECK

B

GO TO CAN COMMUNICATION SYSTEM

READ NEXT:

 Lost Communication with Cruise Control Front Distance Range Sensor Single Sensor or Center Missing Message (U023587)

DESCRIPTION The forward recognition camera communicates with the millimeter wave radar sensor assembly via CAN communication. If a communication malfunction between the forward recognition camera and

 Internal Control Module Software Incompatibility Not Programmed (U030051)

DESCRIPTION If the forward recognition camera cannot verify the vehicle information sent from the hybrid vehicle control ECU, the forward recognition camera stores DTC U030051. DTC No. Detection

 Internal Control Module Software Incompatibility Invalid/Incompatible Software Component (U030057)

DESCRIPTION If the vehicle information stored in the forward recognition camera does not match the vehicle information sent from the hybrid vehicle control ECU, the forward recognition camera stores D

SEE MORE:

 Disassembly

DISASSEMBLY CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during engine unit removal/installation are shown below. Necessary Procedure After Parts Removed/Installed/

 Components

COMPONENTS ILLUSTRATION *1 FUEL PRESSURE SENSOR *2 NO. 1 FUEL PRESSURE SENSOR HOLDER Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) ● Non-reusable part

© 2016-2024 Copyright www.lexguide.net