Lexus ES manuals

Lexus ES: Software Incompatibility with Brake System Control Module Invalid/Incompatible Software Component (U031857)

Lexus ES (XZ10) Service Manual / Engine & Hybrid System / Cruise Control / Dynamic Radar Cruise Control System (for Hv Model) / Software Incompatibility with Brake System Control Module Invalid/Incompatible Software Component (U031857)

DESCRIPTION

If the vehicle information stored in the forward recognition camera does not match the vehicle information sent from the skid control ECU (brake booster with master cylinder assembly), the forward recognition camera stores DTC U031857.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

MIL

DTC Output from

U031857

Software Incompatibility with Brake System Control Module Invalid/Incompatible Software Component

The vehicle information sent from the skid control ECU (brake booster with master cylinder assembly) does not match that stored in the forward recognition camera.

  • Electronically controlled brake system
  • Forward recognition camera

Does not come on

Radar Cruise2

CAUTION / NOTICE / HINT

NOTICE:

  • When replacing the forward recognition camera, replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle and a DTC may be stored.
  • If the forward recognition camera has been replaced with a new one, it is necessary to perform forward recognition camera adjustment.

    HINT:

    Forward recognition camera adjustment can be performed by using either One Time Recognition or Sequential Recognition.

    One Time Recognition: Click here

    Sequential Recognition: Click here

PROCEDURE

1.

CHECK FOR DTCs

(a) Check for electronically controlled brake system DTCs.

Chassis > ABS/VSC/TRAC > Trouble Codes

Result

Proceed to

Electronically controlled brake system DTCs are not output

A

Electronically controlled brake system DTCs are output

B

A

REPLACE FORWARD RECOGNITION CAMERA

B

GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM

READ NEXT:

 Software Incompatibility with Body Control Module Not Programmed (U032251)

DESCRIPTION If the forward recognition camera cannot verify the vehicle information sent from the main body ECU (multiplex network body ECU), the forward recognition camera stores DTC U032251. DTC

 Software Incompatibility with Body Control Module Invalid/Incompatible Software Component (U032257)

DESCRIPTION If the vehicle information stored in the forward recognition camera does not match the vehicle information sent from the main body ECU (multiplex network body ECU), the forward recognition

 Invalid Data Received from Hybrid Powertrain Control Module Invalid Serial Data Received (U059481)

DESCRIPTION If the hybrid vehicle control ECU cannot recognize the forward recognition camera. DTC U059481 is stored. DTC No. Detection Item DTC Detection Condition Trouble Area MIL DTC O

SEE MORE:

 Replacement

REPLACEMENT PROCEDURE 1. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH Click here 2. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH Click here 3. REMOVE NO. 1 ENGINE UNDER COVER Click here 4. REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY Click here 5. REPLACE HYBRID TRANSAXLE FLU

 Lost Communication with ECM / PCM "A" (U0100,U0125,U0126,U0129,U0142,U0293)

DESCRIPTION These DTCs are stored if there is a malfunction in the CAN communication system connected to the blind spot monitor sensor. HINT: If CAN communication system DTCs are stored, they may also be stored for other systems. Blind Spot Monitor Master DTC No. Detection Item DTC Detection

© 2016-2024 Copyright www.lexguide.net