Lexus ES: Ub80f (automatic Transmission / Transaxle)
Lexus ES (XZ10) Service Manual / Drivetrain / Ub80f (automatic Transmission / Transaxle)
- Automatic Transaxle Assembly
- Automatic Transaxle Fluid
- Automatic Transaxle System
- Combination Switch
- Differential Case
- Differential Oil Seal (for Lh Side)
- Differential Oil Seal (for Rh Side)
- Oil Cooler
- Oil Pump
- Park / Neutral Position Switch
- Shift Lever Knob
- Shift Lever
- Shift Paddle Switch
- Speed Sensor
- Torque Converter And Drive Plate
- Transmission Control Cable
- Valve Body Assembly
READ NEXT:
Components
COMPONENTS ILLUSTRATION *1 VACUUM HOSE *2 FLOW SHUTTING VALVE (NO. 1 WATER BY-PASS HOSE) *3 WATER BY-PASS HOSE ASSEMBLY *4 STEERING GEAR HEAT INSULATOR *5 WIRE HARNESS *6
Installation
INSTALLATION CAUTION / NOTICE / HINT CAUTION: The engine assembly with transaxle is very heavy. Be sure to follow the procedure described in the repair manual, or the engine lifter may suddenly drop o
SEE MORE:
Installation
INSTALLATION PROCEDURE 1. INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY (a) Pass the hood lock control cable assembly into the engine compartment. (b) Engage the grommet. (c) Engage each clamp. (d) Engage the clamp to install the hood lock control cable assembly. 2. INSTALL HOOD LOCK CONTROL LEVER SUB-AS
Problem Symptoms Table
PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected
© 2016-2026 Copyright www.lexguide.net
