Lexus ES: Steering
Lexus ES (XZ10) Service Manual / Steering
- Power Assist Systems
- Steering Column
- Heated Steering Wheel Controller
- Heated Steering Wheel System (for Gasoline Model)
- Heated Steering Wheel System (for Hv Model)
- Multiplex Tilt And Telescopic Ecu
- Power Tilt And Power Telescopic Steering Column System (for Hv Model)
- Power Tilt And Power Telescopic Steering Column System(for Gasoline Model)
- Steering Column Assembly (for Manual Tilt And Manual Telescopic Steering Column)
- Steering Column Assembly (for Power Tilt And Power Telescopic Steering Column)
- Steering Heater Switch
- Steering Pad Switch
- Steering System
- Steering Wheel
- Tilt And Telescopic Manual Switch
- Steering Gear / Linkage
READ NEXT:
Precaution
PRECAUTION PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL NOTICE: When disconnecting the cable from the negative (-) auxiliary battery terminal, initialize the following s
SEE MORE:
Components
COMPONENTS ILLUSTRATION *1 NO. 1 ENGINE UNDER COVER *2 FRONT FENDER APRON SEAL LH *3 FRONT FENDER APRON SEAL RH *4 FRONT WHEEL OPENING EXTENSION PAD LH *5 FRONT WHEEL OPENING EXTENSION PAD RH *6 NO. 2 ENGINE UNDER COVER ASSEMBLY N*m (kgf*cm, ft.*lbf): Specified t
Replacement
REPLACEMENT PROCEDURE 1. REPLACE INTAKE VALVE GUIDE BUSH (a) Heat the cylinder head sub-assembly to between 80 and 100°C (176 and 212°F). (b) Place the cylinder head sub-assembly on wooden blocks. CAUTION: Be sure to wear protective gloves. (c) Using SST and a hammer, tap out the intake valve g
© 2016-2025 Copyright www.lexguide.net
