Lexus ES: Steering Column Assembly (for Power Tilt And Power Telescopic Steering Column)
READ NEXT:
COMPONENTS ILLUSTRATION *1 STEERING WHEEL ASSEMBLY - - Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf)
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during stee
DISASSEMBLY CAUTION / NOTICE / HINT NOTICE: Before replacing the steering lock actuator assembly, refer to Registration. for Gasoline Model: Click here for HV Model: Click here PROCEDURE 1. REM
SEE MORE:
INSTALLATION PROCEDURE 1. INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY (a) Install a new fuel suction tube set gasket to the fuel tank assembly. (b) Insert the fuel suction tube with pump and gauge assembly to the fuel tank assembly as shown in the illustration. (c) Set t
DTC CHECK / CLEAR CHECK FOR DTC (MAIN BODY) (a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Main Body / Trouble Codes. Body Electrical > Main Body > Trouble Codes (e) Check for DTCs. CHECK
© 2016-2025 Copyright www.lexguide.net
