Lexus ES: Steering Column Assembly (for Manual Tilt And Manual Telescopic Steering Column)
Lexus ES (XZ10) Service Manual / Steering / Steering Column / Steering Column Assembly (for Manual Tilt And Manual Telescopic Steering Column)
READ NEXT:
Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during stee
Disassembly
DISASSEMBLY CAUTION / NOTICE / HINT NOTICE: Before replacing the steering lock actuator assembly, refer to Registration. for Gasoline Model: Click here for HV Model: Click here PROCEDURE 1. REM
Inspection
INSPECTION PROCEDURE 1. INSPECT STEERING COLUMN ASSEMBLY (a) Check that the 2 bushings are securely installed to the steering column assembly. HINT: If the bushings are deformed, missing or damaged
SEE MORE:
Terminals Of Ecu
TERMINALS OF ECU CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) (a) Remove the main body ECU (multiplex network body ECU) from the instrument panel junction block assembly. Click here (b) Measure the resistance according to the value(s) in the table
Adjustment
ADJUSTMENT CAUTION / NOTICE / HINT *a Centering Bolt *b Standard Bolt HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
Centering bolts are used to install the door hinges to the vehicle body and door. The door cannot be adjus
© 2016-2026 Copyright www.lexguide.net
