Lexus ES: Vacuum Pump (for Tmc Made 2gr-fks)
READ NEXT:
Components
COMPONENTS ILLUSTRATION *1 ENGINE WIRE *2 NO. 2 SURGE TANK STAY *3 EARTH WIRE - - Tightening torque for "Major areas involving basic vehicle performance such as moving/turni
Disassembly
DISASSEMBLY PROCEDURE 1. REMOVE END COVER (a) Using a T30 "TORX" socket wrench, remove the 5 screws and end cover. NOTICE:
Hold the pump so that the pump installation surface, fitting parts an
Inspection
INSPECTION PROCEDURE 1. INSPECT VACUUM PUMP VANE (a) Check that the vacuum pump vane or vacuum pump vane caps are not damaged or excessively worn. HINT: If the vacuum pump vane or vacuum pump vane
SEE MORE:
Wiper Switch Signal Mismatch between LIN and Line (B1372)
DESCRIPTION Under normal operation, the windshield wiper motor assembly receives operation signals from the windshield wiper switch assembly via LIN communication. The windshield wiper motor assembly and windshield wiper switch assembly are also connected via direct line in order to operate the fron
Installation
INSTALLATION PROCEDURE 1. INSTALL STARTER ASSEMBLY (a) Install the starter assembly to the cylinder block sub-assembly with the 2 bolts. Torque: 46 N·m {469 kgf·cm, 34 ft·lbf} (b) Connect the No. 2 engine wire to terminal 30 with the nut. Torque: 9.8 N·m {100 kgf·cm, 87 in·lbf} (c) Close the
© 2016-2026 Copyright www.lexguide.net
