Lexus ES manuals

Lexus ES: Oil Pump

READ NEXT:

 Components

COMPONENTS ILLUSTRATION *1 ENGINE BALANCER ASSEMBLY *2 ENGINE OIL LEVEL SENSOR *3 NO. 2 OIL PAN SUB-ASSEMBLY *4 OIL PUMP ASSEMBLY *5 OIL PUMP BRACKET *6 OIL STRAINER SUB-

 Disassembly

DISASSEMBLY PROCEDURE 1. REMOVE OIL PUMP RELIEF VALVE (a) Using a 27 mm socket wrench, remove the oil pump relief valve plug from the oil pump cover sub-assembly. *1 Oil Pump Relief

 Inspection

INSPECTION PROCEDURE 1. INSPECT OIL PUMP RELIEF VALVE (a) Coat the oil pump relief valve with engine oil, then check that it falls smoothly into the valve hole by its own weight. HINT: If the oil p

SEE MORE:

 Terminals Of Ecu

TERMINALS OF ECU CLEARANCE WARNING ECU ASSEMBLY (a) Disconnect the N41 clearance warning ECU assembly connector. (b) Measure the voltage and resistance on the wire harness side connector according to the value(s) in the table below. Terminal No. (Symbol) Wiring Color Terminal Description C

 Installation

INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH side and LH side. The following procedure is for the LH side. PROCEDURE 1. INSTALL NO. 3 WINDSHIELD OUTSIDE MOULDING CLIP HINT: Perform the following procedure only when replacement of a No. 3 windshield outside mou

© 2016-2026 Copyright www.lexguide.net