Lexus ES: A25a-fks (lubrication)
Lexus ES (XZ10) Service Manual / Engine & Hybrid System / A25a-fks (lubrication)
- Lubrication System
- Oil And Oil Filter
- Oil Pan And Oil Level Sensor
- Oil Pressure And Temperature Sensor
- Oil Pressure Switching Valve
- Oil Pump
READ NEXT:
Lubrication System
On-vehicle InspectionON-VEHICLE INSPECTION PROCEDURE 1. CHECK ENGINE OIL LEVEL (a) Warm up and stop the engine, then wait for 5 minutes. (b) Check that the engine oil level is between the low level a
Oil And Oil Filter
ComponentsCOMPONENTS ILLUSTRATION *1 CENTER NO. 4 ENGINE UNDER COVER - - ILLUSTRATION *1 OIL FILTER SUB-ASSEMBLY *2 OIL FILLER CAP SUB-ASSEMBLY *3 GASKET *4 OIL PAN D
SEE MORE:
Data List / Active Test
DATA LIST / ACTIVE TEST DATA LIST NOTICE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not. HINT: Using the Techstream to read the Data List allows the values or states of
Reassembly
REASSEMBLY CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE 1. INSTALL FRONT AXLE OUTBOARD JOINT BOOT (a) Secure the drive shaft in a vise between aluminum plates. NOTICE: Do not overtighten the vise. (
© 2016-2026 Copyright www.lexguide.net
