Lexus ES: Do-it-yourself maintenance
Lexus ES (XZ10) Owner's Manual / Maintenance and care / Do-it-yourself maintenance
- Do-it-yourself service precautions
- Hood
- Engine compartment
- 12-volt battery
- Tires
- Tire inflation pressure
- Wheels
- Air conditioning filter
- Cleaning the hybrid battery (traction battery) air intake vent and filter
- Electronic key battery
- Checking and replacing fuses
- Headlight aim
- Light bulbs
READ NEXT:
Do-it-yourself service precautions
If you perform maintenance by
yourself, be sure to follow the correct
procedure as given in these
sections.
Maintenance
Items
Parts and tools
12-volt battery
condition
Hood
Opening the hood
1. Pull the hood lock release lever.
The hood will pop up slightly.
2. Pull up the auxiliary catch lever and
lift the hood.
WARNING
■Pre-driving check
Check that the ho
Engine compartment
Components
Fuse boxes
Engine oil filler cap
Engine oil level dipstick
Brake fluid reservoir
Radiator
Electric cooling fan
Condenser
Power control unit coolant reservoir
Engine
SEE MORE:
Disassembly
DISASSEMBLY CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE 1. REMOVE HEADLIGHT ECU SUB-ASSEMBLY Click here 2. REMOVE HEADLIGHT GASKET Click here 3. REMOVE HEADLIGHT RIM (a) Remove the screw.
Inspection
INSPECTION PROCEDURE 1. INSPECT REAR CENTER ULTRASONIC SENSOR (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 4 (BI) - 6 (EI) Always 10 kΩ or higher 4 (BI) - 1 (BO) Always Below
© 2016-2025 Copyright www.lexguide.net
