Lexus ES: Vacuum Switching Valve (for Engine Mounting)
Lexus ES (XZ10) Service Manual / Engine & Hybrid System / 2gr-fks (engine Control) / Vacuum Switching Valve (for Engine Mounting)
READ NEXT:
Components
COMPONENTS ILLUSTRATION *1 AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE *2 COOL AIR INTAKE DUCT SEAL *3 INLET AIR CLEANER ASSEMBLY *4 VACUUM SWITCHING VALVE (for Active Control Engin
Removal
REMOVAL PROCEDURE 1. REMOVE COOL AIR INTAKE DUCT SEAL Click here 2. REMOVE INLET AIR CLEANER ASSEMBLY Click here 3. REMOVE AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE Click here 4. REMOVE VA
Inspection
INSPECTION PROCEDURE 1. INSPECT VACUUM SWITCHING VALVE (for Active Control Engine Mount System) (a) Measure the resistance. (1) Measure the resistance according to the value(s) in the table below.
SEE MORE:
On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT STEERING WHEEL FREE PLAY (a) for Gasoline Model: Start the engine and make sure that the vehicle is in a state in which the power steering can operate. (b) for HV Model: Turn the power switch on (READY) so that the power steering is ready to operate. (c) St
Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during engine oil level sensor removal/installation are shown below. Necessary Procedure After Parts Removed/I
© 2016-2026 Copyright www.lexguide.net
