Lexus ES manuals

Lexus ES: Lost Communication with Cruise Control Front Distance Range Sensor Signal Sensor or Center Missing Message (U023587)

Lexus ES (XZ10) Service Manual / Vehicle Interior / Lighting (ext) / Lighting System (for Gasoline Model) / Lost Communication with Cruise Control Front Distance Range Sensor Signal Sensor or Center Missing Message (U023587)

DESCRIPTION

The forward recognition camera and millimeter wave radar sensor assembly communicate via CAN communication. If there is an error in the communication with the millimeter wave radar sensor assembly, the forward recognition camera stores DTC U023587.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

DTC Output from

U023587

Lost Communication with Cruise Control Front Distance Range Sensor Signal Sensor or Center Missing Message
  • The engine switch is on (IG).
  • The forward recognition camera does not receive data from the millimeter wave radar sensor assembly
  • 5 seconds or more

Pre-collision system

Front Recognition Camera (Front Lighting Control)

PROCEDURE

1.

GO TO PRE-COLLISION SYSTEM

HINT:

If DTC U023587 is output by the lighting system, perform troubleshooting for the pre-collision system.

Click here

NEXT

END

READ NEXT:

 CAN Communication Failure (Message Registry) (U1000)

DESCRIPTION The headlight ECU sub-assembly LH or headlight ECU sub-assembly RH stores this DTC if it detects an internal malfunction related to the CAN communication system. for LED Type Turn Signal L

 Turn Signal Switch Circuit

DESCRIPTION The steering sensor receives the turn signal switch information and controls the turn signal lights. WIRING DIAGRAM PROCEDURE 1. READ VALUE USING TECHSTREAM (a) Connect the Techs

 Automatic High Beam Switch Indicator does not Come ON

DESCRIPTION When the automatic high beam system is on, the steering sensor illuminates the automatic high beam switch indicator. WIRING DIAGRAM PROCEDURE 1. READ VALUE USING TECHSTREAM (a) C

SEE MORE:

 System Description

SYSTEM DESCRIPTION FRONT WIPER AND WASHER CONTROL FUNCTION Control/Function Description Wiper speed regulation Maintains the default speed of the wipers even when the supply voltage or resistance changes. Door open linked wiper suspend function*2 Stops the front wipers when the wind

 Removal

REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during black out tape removal/installation are shown below. Necessary Procedure After Parts Removed/Installed/

© 2016-2026 Copyright www.lexguide.net