Lexus ES: Air Fuel Ratio Sensor
Lexus ES (XZ10) Service Manual / Engine & Hybrid System / 2gr-fks (engine Control) / Air Fuel Ratio Sensor
READ NEXT:
Components
COMPONENTS ILLUSTRATION *1 V-BANK COVER SUB-ASSEMBLY *2 AIR FUEL RATIO SENSOR (for Bank 1) *3 AIR FUEL RATIO SENSOR (for Bank 2) - - N*m (kgf*cm, ft.*lbf): Specified torque
Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during air
Inspection
INSPECTION PROCEDURE 1. INSPECT AIR FUEL RATIO SENSOR (for Bank 1) (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition
SEE MORE:
Back Camera Power Supply Failure (C1621)
DESCRIPTION This DTC is stored if the rear television camera assembly judges as a result of its self check that the signals or signal lines between the rear television camera assembly and parking assist ECU are not normal. DTC No. Detection Item DTC Detection Condition Trouble Area C162
Drive Motor "A" Inverter Stuck On (P0A789E,P1C5D19)
DTC SUMMARY MALFUNCTION DESCRIPTION This DTC indicates that a large current flowed through the motor inverter. The cause of this malfunction may be one of the following: Area Main Malfunction Description Hybrid vehicle transaxle assembly
Open or short circuit in the motor coils
Motor
© 2016-2026 Copyright www.lexguide.net
