Lexus ES manuals

Lexus ES: Vacuum Warning Switch (for Gasoline Model)

Lexus ES (XZ10) Service Manual / Brake / Brake System (other) / Vacuum Warning Switch (for Gasoline Model)

READ NEXT:

 Components

COMPONENTS ILLUSTRATION *1 CHECK VALVE GROMMET *2 VACUUM WARNING SWITCH ASSEMBLY ● Non-reusable part - -

 Installation

INSTALLATION PROCEDURE 1. INSTALL CHECK VALVE GROMMET (a) Install a new check valve grommet to the brake booster assembly. 2. INSTALL VACUUM WARNING SWITCH ASSEMBLY (a) Install the vacuum warning swit

 Installation

INSTALLATION PROCEDURE 1. INSTALL CHECK VALVE GROMMET (a) Install a new check valve grommet to the brake booster assembly. 2. INSTALL VACUUM WARNING SWITCH ASSEMBLY (a) Install the vacuum warning swit

SEE MORE:

 Operation Check

OPERATION CHECK CHECK NAVIGATION SYSTEM NORMAL CONDITION (a) If the cause of a symptom is any of the following, the corresponding symptom is normal; it is not due to a malfunction. Symptom Answer A longer route than expected is chosen. Depending on the road conditions, the navigation ECU

 Stop Switch Circuit Malfunction (C164E)

DESCRIPTION When a stop light switch assembly circuit malfunction signal sent from the electronically controlled brake system is detected by the clearance warning ECU assembly, DTC C164E is stored. DTC No. Detection Item DTC Detection Condition Trouble Area C164E Stop Switch Circuit M

© 2016-2026 Copyright www.lexguide.net