Lexus ES: Transmission Control Cable
Lexus ES (XZ10) Service Manual / Drivetrain / P710 (hybrid Transmission / Transaxle) / Transmission Control Cable
READ NEXT:
Adjustment
ADJUSTMENT PROCEDURE 1. SECURE VEHICLE (a) Fully apply the parking brake and chock a wheel. CAUTION:
Make sure to apply the parking brake and chock a wheel before performing this procedure.
If th
Components
COMPONENTS ILLUSTRATION *1 COOL AIR INTAKE DUCT SEAL *2 INLET AIR CLEANER ASSEMBLY *3 NO. 1 ENGINE COVER SUB-ASSEMBLY *4 AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE *5 FRONT L
Installation
INSTALLATION PROCEDURE 1. INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY (a) Turn the control shaft lever clockwise until it stops, then turn it counterclockwise 2 notches. (b) Engage the
SEE MORE:
Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during rear axle carrier sub-assembly removal/installation are shown below. Necessary Procedures After Parts R
Parts Location
PARTS LOCATION ILLUSTRATION *1 INVERTER WITH CONVERTER ASSEMBLY *2 COMPRESSOR WITH MOTOR ASSEMBLY *3 AUXILIARY BATTERY *4 FUSIBLE LINK BLOCK ASSEMBLY - BATT-S FUSE *5 BATTERY STATE SENSOR ASSEMBLY - - ILLUSTRATION *1 COMBINATION METER ASSEMBLY *2 HYBRID VEH
© 2016-2026 Copyright www.lexguide.net
