Lexus ES: System Description
Lexus ES (XZ10) Service Manual / Suspension / Suspension Control / Adaptive Variable Suspension System / System Description
SYSTEM DESCRIPTION
ADAPTIVE VARIABLE SUSPENSION SYSTEM DESCRIPTION
(a) The ECM judges the mode based on the input from the drive mode select switch (combination switch assembly). The absorber control ECU receives the judgment result via CAN communication and controls the adaptive variable suspension.
READ NEXT:
How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT HINT:
Use the following procedure to troubleshoot the adaptive variable suspension system.
*: Use the Techstream.
PROCEDURE 1. VEHICLE BROUGHT TO WORKSHOP
Customize Parameters
CUSTOMIZE PARAMETERS CUSTOMIZE ADAPTIVE VARIABLE SUSPENSION SYSTEM HINT: "Custom" mode can be selected by using the drive mode select switch (combination switch assembly). (a) Customizing with the mul
Test Mode Procedure
TEST MODE PROCEDURE TEST MODE PROCEDURE NOTICE: After replacing the absorber control ECU, it is necessary to perform registration of vehicle identification information. Vehicle identification informat
SEE MORE:
DC/DC Converter Enable Circuit Short to Battery (P0A1112,P0A1114)
DESCRIPTION Refer to the description for DTC P1CCC96. Click here The motor generator control ECU sends a signal to the DC/DC converter to prohibit its control and receives signals indicating a normal or abnormal (below 11 V) condition of the 12 V charging system from the DC/DC converter via the N
Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during steering column assembly removal/installation are shown below. Necessary Procedures After Parts Removed/
© 2016-2026 Copyright www.lexguide.net
