Lexus ES manuals

Lexus ES: Networking

READ NEXT:

 Network Gateway Ecu

 Installation

INSTALLATION CAUTION / NOTICE / HINT PROCEDURE 1. INSTALL CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU) (a) Engage the 2 claws to install the central gateway ECU (network gateway ECU) as shown in the illu

 Removal

REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during cen

SEE MORE:

 Parts Location

PARTS LOCATION ILLUSTRATION *1 FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY (for LH) *2 FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY (for RH) *3 SLIDING ROOF SWITCH (MAP LIGHT SUB-ASSEMBLY) *4 SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY) *5 COMBINATION METER ASSEMBLY

 Transmitter ID not Registered (Main) (C2171)

DESCRIPTION The IDs of each tire pressure warning valve and transmitter are registered to the tire pressure warning ECU and receiver. When the ECU detects that a transmitter ID code is not registered in the ECU, this DTC is stored. DTC No. Detection Item DTC Detection Condition Trouble Area

© 2016-2026 Copyright www.lexguide.net