Lexus ES: Network Gateway Ecu
READ NEXT:
Installation
INSTALLATION CAUTION / NOTICE / HINT PROCEDURE 1. INSTALL CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU) (a) Engage the 2 claws to install the central gateway ECU (network gateway ECU) as shown in the illu
Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during cen
Components
COMPONENTS ILLUSTRATION *1 CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU) *2 ECU INTEGRATION BOX RH *3 GLOVE COMPARTMENT DOOR ASSEMBLY - -
SEE MORE:
Dtc Check / Clear
DTC CHECK / CLEAR NOTICE: When the diagnosis system is changed from normal mode to check mode or vice versa, all DTCs and Freeze Frame Data recorded in normal mode are cleared. Before changing modes, always check and make a note of DTCs and Freeze Frame Data. HINT:
DTCs which are stored in the EC
Installation
INSTALLATION PROCEDURE 1. INSTALL LEAK DETECTION PUMP SUB-ASSEMBLY HINT: Only perform this procedure when replacement of the leak detection pump sub-assembly is necessary. (a) Engage the 2 claws to install a new leak detection pump sub-assembly to the No. 2 charcoal canister sub-assembly. NOTIC
© 2016-2026 Copyright www.lexguide.net
