Lexus ES: Motor Cable
READ NEXT:
Components
COMPONENTS ILLUSTRATION *1 MOTOR CABLE *2 CONNECTOR COVER *3 TERMINAL CAP - - Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/s
Installation
INSTALLATION PROCEDURE 1. INSTALL MOTOR CABLE CAUTION: Be sure to wear insulated gloves. (a) Using an insulated tool, install the motor cable to the hybrid vehicle transaxle assembly with the 6 bolts.
Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during mot
SEE MORE:
On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. SECURE VEHICLE (a) Fully apply the parking brake and chock a wheel. CAUTION:
Make sure to apply the parking brake and chock a wheel before performing this procedure.
If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move,
Removal
REMOVAL PROCEDURE 1. REMOVE REAR FLOOR SIDE MEMBER COVER (a) Remove the bolt and 7 clips. (b) Disengage the 3 clamps (A) and 2 clamps (B) to remove the rear floor side member cover from the vehicle body. 2. REMOVE CANISTER (CHARCOAL CANISTER ASSEMBLY) (a) Disconnect the fuel tank vent
© 2016-2026 Copyright www.lexguide.net
