Lexus ES: Hv Battery (for Lithium-ion Battery)
Lexus ES (XZ10) Service Manual / Engine & Hybrid System / Hybrid / Battery Control / Hv Battery (for Lithium-ion Battery)
READ NEXT:
Components
COMPONENTS ILLUSTRATION *1 BATTERY SERVICE HOLE COVER *2 SERVICE PLUG GRIP ILLUSTRATION *1 CONNECTOR COVER ASSEMBLY *2 ENGINE ROOM MAIN WIRE Tightening torque for "Major
Installation
INSTALLATION PROCEDURE 1. TEMPORARILY INSTALL NO. 4 HV BATTERY END PLATE SUB-ASSEMBLY CAUTION: Be sure to wear insulated gloves. (a) Temporarily install the No. 4 HV battery end plate sub-assembly to
Recovery Inspection
CAUTION / NOTICE / HINT CAUTION:
When disposing of an HV battery, make sure to return it through an authorized collection agent who is capable of handling it safely. If the HV battery is returned v
SEE MORE:
Fail-safe Chart
FAIL-SAFE CHART FAIL-SAFE FUNCTION (a) When communication fails in any of the CAN bus lines (communication lines), a fail-safe function(s) will operate. The fail-safe function that is specified for each system operates to prevent those systems from malfunctioning. (b) The following table shows the e
Data List / Active Test
DATA LIST / ACTIVE TEST NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
When diagnosing symptoms such as hesitation, rough idle, or other small symptoms usi
© 2016-2026 Copyright www.lexguide.net
