Lexus ES: Engine Coolant Temperature Sensor
Lexus ES (XZ10) Service Manual / Engine & Hybrid System / A25a-fxs (engine Control) / Engine Coolant Temperature Sensor
READ NEXT:
Components
COMPONENTS ILLUSTRATION *1 COOL AIR INTAKE DUCT SEAL *2 ENGINE COOLANT TEMPERATURE SENSOR *3 INLET AIR CLEANER ASSEMBLY *4 NO. 2 ENGINE COOLANT TEMPERATURE SENSOR N*m (kgf*c
Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during eng
Inspection
INSPECTION CAUTION / NOTICE / HINT CAUTION:
Do not put your hands into the water that has been heated for the inspection.
Touching the heated water could result in burns.
PROCEDURE 1. INSPECT
SEE MORE:
Repair
REPAIR CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
If the installation area of the headlight assembly is damaged, use a supply retainer for a low-cost repair.
Ensure that the headlight assembly is not damaged.
Open Circuit in Main Relay 1 (C1311,C1312)
DESCRIPTION The main relay supplies power to the switching solenoid and the linear solenoid. The main relay remains on for approximately 2 minutes after the power switch is turned off and the input of brake pedal operation signals stops, and supplies power to the system to keep it ready to operate.
© 2016-2025 Copyright www.lexguide.net
