Lexus ES: Components
COMPONENTS
ILLUSTRATION
|
*1 |
NO. 1 HV BATTERY INTAKE FILTER |
*2 |
BATTERY SERVICE HOLE COVER |
READ NEXT:
Removal
REMOVAL
PROCEDURE
1. REMOVE BATTERY SERVICE HOLE COVER
(a) Remove the clip.
Remove in this Direction
(b) Disengage the 7 claws as shown in the illustration.
(c) Di
Inspection
INSPECTION
PROCEDURE
1. INSPECT NO. 1 HV BATTERY INTAKE FILTER
HINT:
If the vehicle is used in an area with heavy traffic or excessive dust,
or if the rear seat is used frequently, the
Installation
INSTALLATION
PROCEDURE
1. INSTALL NO. 1 HV BATTERY INTAKE FILTER
(a) Engage the 2 claws to temporarily install the No. 1 HV battery intake filter
to the battery service hole cover.
(b) Engage th
SEE MORE:
Assist Map Number Mismatch (C1582)
DESCRIPTION When an incorrect hybrid vehicle control ECU or skid control ECU (brake booster with master cylinder assembly) is installed after the assist map has been written to the power steering ECU (rack and pinion power steering gear assembly), DTC C1582 is stored because the information stored i
Operation Check
OPERATION CHECK INPUT SIGNAL CHECK (a) Connect the Techstream to the DLC3. (b) Check the steering pad switch assembly using the Data List function of the Techstream (cruise control main switch, -SET switch, +RES switch and CANCEL switch). Click here *1 Steering Pad Switch Assembly *a C
© 2016-2026 Copyright www.lexguide.net
