Lexus ES: Accelerator Pedal
Lexus ES (XZ10) Service Manual / Engine & Hybrid System / 2gr-fks (engine Control) / Accelerator Pedal
READ NEXT:
Components
COMPONENTS ILLUSTRATION *A for TMK Made *B for TMMK Made *1 ACCELERATOR PEDAL ASSEMBLY *2 ACCELERATOR PEDAL PAD *3 ACCELERATOR PEDAL SENSOR ASSEMBLY *4 NO. 1 INSTRUMENT P
On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT ACCELERATOR PEDAL SENSOR ASSEMBLY (a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG). (c) Turn the Techstream on. (d) Enter the follo
Removal
REMOVAL PROCEDURE 1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Click here 2. REMOVE ACCELERATOR PEDAL(W/SENSOR) ROD ASSEMBLY NOTICE:
Avoid physical shock to the accelerator pedal se
SEE MORE:
Diagnosis System
DIAGNOSIS SYSTEM DLC3 (Data Link Connector 3) (a) Check the DLC3. Click here AUXILIARY BATTERY VOLTAGE Standard Voltage: Switch Condition Specified Condition Power switch on (IG) 11 to 14 V
If voltage is below 11 V, recharge or replace the auxiliary battery. NOTICE: After turning
Headlight Dimmer Switch Circuit
DESCRIPTION The steering sensor receives the following switch information:
Light control switch in DRL OFF*1, off*2, tail, head or AUTO position
Dimmer switch in high, low or high flash (pass) position
*1: w/ DRL OFF Switch
*2: w/o DRL OFF Switch
WIRING DIAGRAM CAUTION / NOTICE / HI
© 2016-2025 Copyright www.lexguide.net
