Lexus ES: A25a-fxs (fuel)
Lexus ES (XZ10) Service Manual / Engine & Hybrid System / A25a-fxs (fuel)
- Fuel Injector (for Direct Injection)
- Fuel Injector (for Port Injection)
- Fuel Main Valve
- Fuel Pressure Sensor
- Fuel Pressure Sensor (for High Pressure)
- Fuel Pump
- Fuel Pump (for High Pressure)
- Fuel Pump Ecu
- Fuel Sender Gauge Assembly
- Fuel System
- Fuel Tank
READ NEXT:
Components
COMPONENTS ILLUSTRATION *A for EGR Valve Bracket Connection Type *B for Cylinder Head Cover Sub-assembly Connection Type *1 FUEL DELIVERY PIPE *2 FUEL INJECTOR SEAL *3 DIRECT
Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during dire
SEE MORE:
Operation Check
OPERATION CHECK CHECK WINDOW DEFOGGER SYSTEM (a) Turn the engine switch on (IG). (b) Check that the rear window defogger wire becomes warm by operating the rear window defogger switch of the air conditioning control assembly. (c) When the vehicle is stopped, confirm that the window defogger system o
Installation
INSTALLATION PROCEDURE 1. INSTALL ACCELERATOR PEDAL ASSEMBLY (a) Engage the claw to install the accelerator pedal assembly. (b) Install the 2 bolts. Torque: 7.5 N·m {76 kgf·cm, 66 in·lbf} 2. INSTALL ACCELERATOR PEDAL PAD (a) Engage the 4 claws to install the accelerator pedal pad
© 2016-2025 Copyright www.lexguide.net
