Lexus ES: Using the other interior features
READ NEXT:
Sun visors
To set the visor in the forward position,
flip it down.
To set the visor in the side position,
flip down, unhook, and swing it to
the side.
To use the side extender, place t
The garage door opener can be
programmed using the Home-
Link to operate garage doors,
gates, entry doors, door locks,
home lighting systems, security systems,
and other devices.
System componen
The compass on the inside rear
view mirror indicates the direction
in which the vehicle is heading.
Operation and displays
To turn the compass on or off, press
and hold the button for more than 3
SEE MORE:
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during fuel main valve assembly removal/installation are shown below. Necessary Procedures After Parts Removed/
INSTALLATION CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE 1. INSTALL HEADLIGHT GASKET (a) Install a new headlight gasket. 2. INSTALL HEADLIGHT ECU SUB-ASSEMBLY NOTICE: If the headlight ECU sub-assembly
© 2016-2024 Copyright www.lexguide.net