Lexus ES: Television Camera (for Side)
READ NEXT:
COMPONENTS ILLUSTRATION *1 OUTER MIRROR *2 OUTER MIRROR COVER ASSEMBLY *3 SIDE TELEVISION CAMERA ASSEMBLY *4 OUTER MIRROR TAPE *5 CAMERA CONNECTOR CLAMP - - ● Non
INSTALLATION CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE 1. INSTALL SIDE TELEVISION CAMERA ASSEMBLY
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during sid
SEE MORE:
INSPECTION PROCEDURE 1. INSPECT SHIFT LOCK CONTROL ECU HINT: If the results of the following inspections are as specified but a malfunction has occurred, replace the shift lock control unit assembly. (a) Inspect wire harness: (1) Disconnect the shift lock control ECU connector. (2)
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during rear stabilizer bar removal/installation are shown below. Necessary Procedures After Parts Removed/Inst
© 2016-2026 Copyright www.lexguide.net
