Lexus ES manuals

Lexus ES: Installation

Lexus ES (XZ10) Service Manual / Audio & Visual & Telematics / Park Assist / Monitoring / Television Camera (for Side) / Installation

INSTALLATION

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH side and LH side.
  • The following procedure is for the LH side.

PROCEDURE

1. INSTALL SIDE TELEVISION CAMERA ASSEMBLY

(a) Install the side television camera assembly with the 2 screws.

2. INSTALL OUTER MIRROR COVER ASSEMBLY

Click here

3. INSTALL OUTER MIRROR

Click here

4. PERFORM CALIBRATION

for HV Model: Click here

for Gasoline Model: Click here

READ NEXT:

 Removal

REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during sid

 Television Camera(for Rear)

 Components

COMPONENTS ILLUSTRATION *1 REAR TELEVISION CAMERA ASSEMBLY *2 TELEVISION CAMERA ASSEMBLY WITH WIRE *3 TELEVISION CAMERA WIRE - -

SEE MORE:

 Tilt and Telescopic Manual Switch Circuit Circuit Voltage Out of Range (B26031C)

DESCRIPTION Different voltage values are sent to the multiplex tilt and telescopic ECU by operating the tilt and telescopic switch. The multiplex tilt and telescopic ECU then judges which motor and in which direction that motor should operate based on the voltage value. DTC No. Detection Item

 Removal

REMOVAL PROCEDURE 1. REMOVE FRONT WHEEL RH Click here 2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH (a) Remove the 3 screws and front wheel opening extension pad RH. 3. REMOVE REAR FENDER SPLASH SHIELD SUB-ASSEMBLY RH (a) Using a screwdriver with its tip wrapped with protective tap

© 2016-2026 Copyright www.lexguide.net