Lexus ES: Rear Axle Hub Bolt
READ NEXT:
Components
COMPONENTS ILLUSTRATION *1 NO. 2 PARKING BRAKE WIRE ASSEMBLY *2 REAR AXLE HUB BOLT *3 REAR DISC *4 REAR DISC BRAKE CALIPER ASSEMBLY *5 REAR FLEXIBLE HOSE - - Tight
Replacement
REPLACEMENT CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during
SEE MORE:
Initialization
INITIALIZATION INITIALIZE PARKING ASSIST MONITOR SYSTEM (a) When "!" mark is displayed on the image of the area behind the vehicle, perform the following procedure to correct the steering angle neutral point. (1) Fully turn the steering wheel to the right and left on flat ground. NOTICE: Memorizing
Installation
INSTALLATION PROCEDURE 1. INSPECT AND ADJUST BRAKE PEDAL HEIGHT Click here 2. INSTALL BRAKE PEDAL STROKE SENSOR ASSEMBLY NOTICE:
Do not drop the brake pedal stroke sensor assembly.
If the brake pedal stroke sensor assembly has been dropped, replace the brake pedal stroke sensor assembly with
© 2016-2025 Copyright www.lexguide.net
