Lexus ES: Motor Generator Control Computer
Lexus ES (XZ10) Service Manual / Engine & Hybrid System / Hybrid / Battery Control / Motor Generator Control Computer
READ NEXT:
Precaution
PRECAUTION 1.PRECAUTION WHEN REMOVING/INSTALLING INVERTER WITH CONVERTER ASSEMBLY CAUTION:
Do not push down or apply excessive force to the inverter with converter assembly.
Be careful not to inj
Components
COMPONENTS ILLUSTRATION *1 WIRE HARNESS CLAMP BRACKET *2 INVERTER WITH CONVERTER ASSEMBLY *3 INVERTER PROTECTOR - - N*m (kgf*cm, ft.*lbf): Specified torque - - ILLUST
Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during mot
SEE MORE:
VSC OFF Switch Circuit
DESCRIPTION The skid control ECU (brake booster with master cylinder assembly) is connected to the combination meter assembly via CAN communication. Pressing the VSC OFF switch turns off TRAC operation, and pressing and holding this switch turns off TRAC and VSC operation. If TRAC and VSC operations
Check Bus 2 Line for Short to GND
DESCRIPTION There may be a short circuit between one of the CAN bus lines and GND when there is no resistance between terminal 18 (CA4H) of the central gateway ECU (network gateway ECU) and terminal 4 (CG) of the DLC3, or terminal 17 (CA4L) of the central gateway ECU (network gateway ECU) and termin
© 2016-2026 Copyright www.lexguide.net
