Lexus ES: Front Lower Suspension Arm
READ NEXT:
COMPONENTS ILLUSTRATION *A for A25A-FXS *B for 2GR-FKS *C Type A *D Type B *1 FRONT FENDER APRON SEAL LH *2 FRONT FLOOR COVER LH *3 FRONT WHEEL OPENING EXTENSION PA
COMPONENTS ILLUSTRATION *A for A25A-FXS, A25A-FKS *B for 2GR-FKS *C Type A *D Type B *1 FRONT FENDER APRON SEAL LH *2 FRONT FLOOR COVER LH *3 FRONT WHEEL OPENING EX
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during fro
SEE MORE:
TERMINALS OF ECU NOTICE:
DTCs may be output when connectors are disconnected during inspection. Therefore, be sure to clear the DTCs using the Techstream once the inspection has been completed.
Do not apply excessive force to the forward recognition camera connector.
CHECK FORWARD RECOGNITI
REMOVAL CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE 1. REMOVE NO. 2 ROCKER PANEL MOULDING PROTECTOR Click here 2. REMOVE ROCKER PANEL MOULDING COVER (a) Using a screwdriver with its tip wrapped w
© 2016-2026 Copyright www.lexguide.net
