Lexus ES: Front Camera
- Components
- Removal
- Installation
- Before Starting Adjustment
- Adjustment (one Time Recognition)
- Adjustment (sequential Recognition)
READ NEXT:
Components
COMPONENTS ILLUSTRATION *1 FORWARD RECOGNITION CAMERA *2 FORWARD RECOGNITION LATCH *3 NO. 1 FORWARD RECOGNITION COVER *4 NO. 2 FORWARD RECOGNITION COVER
Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are replaced during forward recognition camera re
Installation
INSTALLATION CAUTION / NOTICE / HINT PROCEDURE 1. INSTALL FORWARD RECOGNITION CAMERA NOTICE:
When replacing the forward recognition camera, replace it with a new one.
If the forward recognition c
SEE MORE:
Blind Spot Monitor Beam Axis Inspection Incomplete (C1AF9)
DESCRIPTION This DTC is stored when the clearance warning ECU assembly receives a signal from the blind spot monitor system via CAN communication indicating that the beam axis inspection is incomplete. DTC No. Detection Item DTC Detection Condition Trouble Area C1AF9 Blind Spot Monito
Tire Pressure Monitor ECU Communication Stop (C2179)
DESCRIPTION The main body ECU (multiplex network body ECU) sends signals to the tire pressure warning ECU and receiver via a direct line. DTC No. Detection Item DTC Detection Condition Trouble Area Note C2179 Tire Pressure Monitor ECU Communication Stop Communication between the m
© 2016-2025 Copyright www.lexguide.net
