Lexus ES manuals

Lexus ES: Front Brake Flexible Hose

Lexus ES (XZ10) Service Manual / General / Maintenance / Front Brake Flexible Hose

READ NEXT:

 Components

COMPONENTS ILLUSTRATION *1 FRONT FLEXIBLE HOSE *2 GASKET *3 BRAKE LINE *4 FRONT SPEED SENSOR

 Removal

REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during

 Installation

INSTALLATION CAUTION / NOTICE / HINT NOTICE: Because the left and right front flexible hoses are not interchangeable, verify the part number when installing the front flexible hoses.

SEE MORE:

 Reassembly

REASSEMBLY PROCEDURE 1. INSTALL GENERATOR ROTOR BEARING (a) Using SST and a press, install a new generator rotor bearing. SST: 09950-60011 09951-00470 SST: 09950-70010 09951-07100 (b) Fit the tabs of the retainer plate into the cutouts of the generator drive end frame to install th

 Key-off Operation Function Operates even if Operating Conditions are not Satisfied

DESCRIPTION The sliding roof ECU (sliding roof drive gear sub-assembly) operates its built-in motor according to the sliding roof switch (map light sub-assembly) operation. Using the sliding roof switch (map light sub-assembly), if the sliding roof can be operated normally when 45 seconds or more ha

© 2016-2024 Copyright www.lexguide.net