Lexus ES manuals

Lexus ES: Fail-safe Chart

FAIL-SAFE CHART

FAIL-SAFE FUNCTION

(a) When a malfunction occurs in the lane control system, a message will be displayed on the multi-information display and, depending on the malfunction, functions of the lane control system will be disabled.

Warning Message

Cause

Fail-safe Operation

Conditions to Return to Normal Condition

Lane Departure Alert Function

Steering Assist Function

Lane Centering Function

Vehicle Sway Warning Function

X: Control is suspended

LTA Malfunction Visit Your Dealer

Lane control system is malfunctioning

HINT:

Click here

X

X

X

X

After system returns to normal, power switch is turned off and then to on (IG) or LTA main switch is turned off and then to on.

Front Camera Unavailable

Forward recognition camera temperature out of operating range

X

X

X

X

Forward recognition camera temperature returns to normal

Abnormal forward recognition camera voltage

X

X

X

X

Forward recognition camera voltage returns to normal

Forward recognition camera is temporarily unavailable (forward recognition camera recognition stopped)

X

X

X

X

The conditions which prevent the forward recognition camera from performing recognition return to normal.

Front Camera Unavailable See Owner's Manual

  • Area of windshield glass in front of forward recognition camera is dirty or fogged up
  • Lens of forward recognition camera is dirty or fogged up

X

X

X

X

Forward recognition camera or area of windshield glass in front of forward recognition camera is cleaned

LTA Unavailable

Sensor other than forward recognition camera sensor is temporarily unavailable

HINT:

Click here

X

X

X

X

Temporarily unavailable sensor becomes available

READ NEXT:

 Freeze Frame Data

FREEZE FRAME DATA DESCRIPTION (a) Whenever a lane control system DTC is stored, the forward recognition camera stores the current vehicle state as Freeze Frame Data. CHECK FREEZE FRAME DATA (a) Connec

 Data List / Active Test

DATA LIST / ACTIVE TEST DATA LIST NOTICE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a pa

 Diagnostic Trouble Code Chart

DIAGNOSTIC TROUBLE CODE CHART Lane Control System DTC No. Detection Item Link C1A7496 Steering Vibrator Component Internal Failure U012587 Lost Communication with Multi-axis Ac

SEE MORE:

 Problem Symptoms Table

PROBLEM SYMPTOMS TABLE HINT: If CAN communication system and lane control system DTCs are not output and any of the following problem symptoms exist, perform troubleshooting by checking the appropriate suspected areas in the order they are listed. Use the table below to help determine the cause

 Parts Location

PARTS LOCATION ILLUSTRATION *1 PARK/NEUTRAL POSITION SWITCH ASSEMBLY *2 SIDE TURN SIGNAL LIGHT ASSEMBLY LH *3 SIDE TURN SIGNAL LIGHT ASSEMBLY RH *4 HEADLIGHT ASSEMBLY LH - HEADLIGHT ECU SUB-ASSEMBLY LH - HEADLIGHT UNIT ASSEMBLY LH (for TMC Made) - HEADLIGHT CORD LH (for Bulb Type

© 2016-2026 Copyright www.lexguide.net