Lexus ES: Coolant(for Inverter)
Lexus ES (XZ10) Service Manual / Engine & Hybrid System / Hybrid / Battery Control / Coolant(for Inverter)
READ NEXT:
Components
COMPONENTS ILLUSTRATION *1 RESERVE TANK CAP *2 DRAIN COCK PLUG *3 NO. 1 ENGINE UNDER COVER - -
On-vehicle Inspection
ON-VEHICLE INSPECTION CAUTION / NOTICE / HINT CAUTION: To avoid the danger of being burned, do not remove the reserve tank cap while the coolant (for inverter) is still hot. Pressurized, hot coolant (
Replacement
REPLACEMENT CAUTION / NOTICE / HINT CAUTION: To avoid the danger of being burned, do not remove the reserve tank cap or drain cock plug while the coolant (for inverter) is still hot. Pressurized, hot
SEE MORE:
Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during fuel pump with filter assembly removal/installation are shown below. Necessary Procedures After Parts Re
Installation
INSTALLATION CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE 1. INSTALL FRONT DRIVE SHAFT HOLE SNAP RING (a) Install a new front drive shaft hole snap ring. NOTICE: Face the end gap of the front drive sha
© 2016-2026 Copyright www.lexguide.net
