Lexus ES: Coolant(for Inverter)
READ NEXT:
COMPONENTS
ILLUSTRATION
*1
RESERVE TANK CAP
*2
DRAIN COCK PLUG
*3
NO. 1 ENGINE UNDER COVER
-
-
REPLACEMENT
CAUTION / NOTICE / HINT
CAUTION:
To avoid the danger of being burned, do not remove the reserve tank cap or drain
cock plug while the coolant (for inverter) is still hot. Pressurized,
Components
COMPONENTS
ILLUSTRATION
*1
REAR DIFFERENTIAL FILLER PLUG
*2
REAR DIFFERENTIAL DRAIN PLUG
*3
GASKET
SEE MORE:
INSTALLATION PROCEDURE 1. INSTALL REAR BUMPER ASSEMBLY (a) w/ Wire Harness: (1) Connect the connector. (b) Engage the 6 claws as shown in the illustration. Install in this Direction (c) Engage the 6 claws as shown in the illustration. Install in this Direction HINT: Use the same
DESCRIPTION Refer to DTC P280712. Click here DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note P280714 Pressure Control Solenoid "G" Circuit Short to Ground or Open While the vehicle is being driven so that gear changes occur, a short to ground or o
© 2016-2024 Copyright www.lexguide.net