Lexus ES: Brake Fluid (for Hv Model)
READ NEXT:
Bleeding
BLEEDING CAUTION / NOTICE / HINT NOTICE:
Perform air bleeding with the shift lever in P and the parking brake applied.
Perform air bleeding while maintaining the brake fluid level between the MAX
Components
COMPONENTS ILLUSTRATION *1 BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY - - ILLUSTRATION *1 FRONT DISC BRAKE BLEEDER PLUG *2 FRONT DISC BRAKE BLEEDER PLUG CAP *3 RE
On-vehicle Inspection
ON-VEHICLE INSPECTION CAUTION / NOTICE / HINT NOTICE: If using a dropper to adjust the fluid amount, make sure that the dropper has not been used with mineral oils, water or deteriorated brake fluid.
SEE MORE:
Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during fuel tank assembly removal/installation are shown below. Necessary Procedures After Parts Removed/Instal
Adjustment
ADJUSTMENT PROCEDURE 1. INSPECT AND ADJUST BRAKE PEDAL HEIGHT (a) Remove the front door scuff plate LH. Click here (b) Remove the cowl side trim board LH. Click here (c) Remove the No. 1 instrument panel under cover sub-assembly. Click here (d) Remove the accelerator pedal pad. Click here (e
© 2016-2026 Copyright www.lexguide.net
