Lexus ES manuals

Lexus ES: Auto ID Under Registration (C2128)

DESCRIPTION

When ID registration is being performed via the automatic ID registration function, the tire pressure warning ECU and receiver stores C2128 and the tire pressure warning light flashes for 1 minute and then illuminates.

When the tire pressure warning ECU receives data from all registered tire pressure warning valve and transmitters and the system is judged to be normal, the tire pressure warning light turns off.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

Note

C2128

Auto ID Under Registration

ID registration is being performed via the automatic ID registration function

Electronically controlled brake system

-

PROCEDURE

1.

CHECK FOR DTC (ELECTRONICALLY CONTROLLED BRAKE SYSTEM)

(a) Turn the engine switch on (IG).

(b) Check if the electronically controlled brake system DTCs are output.

Chassis > Brake/EPB > Trouble Codes

HINT:

If DTC C2128 is stored, electronically controlled brake system DTCs may also be stored. If electronically controlled brake system DTCs are stored, perform troubleshooting for the electronically controlled brake system before performing ID registration via the automatic ID registration function.

Result

Proceed to

DTCs are not output

A

DTCs are output

B

B

GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM

A

2.

REGISTRATION OF TRANSMITTER ID (ID REGISTRATION VIA AUTOMATIC ID REGISTRATION FUNCTION)

(a) Turn the engine switch off.

(b) Turn the engine switch on (IG).

(c) Perform ID registration for the tire pressure warning ECU and receiver (ID registration via the automatic ID registration function).

Click here

HINT:

Perform the following procedures within 1 trip and do not turn the engine switch off.

NEXT

3.

READ VALUE USING TECHSTREAM ([RAM] AUTO ID REGISTERED WHEEL JUDGMENT STATUS)

(a) Connect the Techstream to the DLC3.

(b) Turn the Techstream on.

(c) Enter the following menus: Chassis / Tire Pressure Monitor / Data List.

(d) According to the display on the Techstream, display the ECU Data List.

Chassis > Tire Pressure Monitor > Data List

Tester Display

[RAM] Auto ID Registered FL Wheel Judgment Status

[RAM] Auto ID Registered FR Wheel Judgment Status

[RAM] Auto ID Registered RL Wheel Judgment Status

[RAM] Auto ID Registered RR Wheel Judgment Status

(e) Refer to the following chart and check the "[RAM] Auto ID Registered Wheel Judgment Status" of each transmitter.

Chassis > Tire Pressure Monitor > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

[RAM] Auto ID Registered FL Wheel Judgment Status

FL wheel registration status during automatic ID registration (RAM)

Fixed, Under a Judgment of Side by Side Car Influence or Under a Judgment, Not Registered

Actual registration status

Cleared each time the engine switch is turned on (IG) from off.

[RAM] Auto ID Registered FR Wheel Judgment Status

FR wheel registration status during automatic ID registration (RAM)

Fixed, Under a Judgment of Side by Side Car Influence or Under a Judgment, Not Registered

Actual registration status

Cleared each time the engine switch is turned on (IG) from off.

[RAM] Auto ID Registered RL Wheel Judgment Status

RL wheel registration status during automatic ID registration (RAM)

Fixed, Under a Judgment of Side by Side Car Influence or Under a Judgment, Not Registered

Actual registration status

Cleared each time the engine switch is turned on (IG) from off.

[RAM] Auto ID Registered RR Wheel Judgment Status

RR wheel registration status during automatic ID registration (RAM)

Fixed, Under a Judgment of Side by Side Car Influence or Under a Judgment, Not Registered

Actual registration status

Cleared each time the engine switch is turned on (IG) from off.

Result

Proceed to

"Under a Judgment of Side by Side Car Influence or Under a Judgment" is displayed for 1 or more "[RAM] Auto ID Registered Wheel Judgment Status" Data List items.

A

"Under a Judgment of Side by Side Car Influence or Under a Judgment" is not displayed for any "[RAM] Auto ID Registered Wheel Judgment Status" Data List items.

B

B

GO TO STEP 5

A

4.

REGISTRATION OF TRANSMITTER ID (ID REGISTRATION VIA TECHSTREAM)

(a) Perform ID registration for the tire pressure warning ECU and receiver (ID registration via Techstream).

Click here

NEXT

END

5.

REGISTRATION OF TRANSMITTER ID (ID REGISTRATION VIA TECHSTREAM)

(a) Perform ID registration for the tire pressure warning ECU and receiver (ID registration via Techstream).

Click here

NEXT

END

READ NEXT:

 Transmitter ID1 Error (C2141-C2144)

DESCRIPTION The tire pressure warning valve and transmitters that are installed in the tire and wheel assemblies measure the tire pressure of each wheel. The measured values are transmitted to the tir

 Transmitter ID not Registered (Main) (C2171)

DESCRIPTION The IDs of each tire pressure warning valve and transmitter are registered to the tire pressure warning ECU and receiver. When the ECU detects that a transmitter ID code is not registered

 Receiver Error (C2176)

DESCRIPTION Tire pressure warning valve and transmitter signals are transmitted to the tire pressure warning ECU and receiver in the vehicle as radio waves. DTC No. Detection Item DTC Detection

SEE MORE:

 Data List / Active Test

DATA LIST / ACTIVE TEST DATA LIST NOTICE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not. (a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG). (c)

 Driver Side Power Mirror cannot be Adjusted with Power Mirror Switch

DESCRIPTION The outer mirror switch assembly sends the mirror adjust switch signals to the main body ECU (multiplex network body ECU). The main body ECU (multiplex network body ECU) then sends the received mirror adjust switch signals to the outer mirror control ECU assembly (driver door) via CAN co

© 2016-2024 Copyright www.lexguide.net