Lexus ES: Tire Pressure Monitoring
Lexus ES (XZ10) Service Manual / Suspension / Tire Pressure Monitoring
- Tire Pressure Warning Receiver
- Tire Pressure Warning System (for Hv Model)
- Tire Pressure Warning System(for Gasoline Model)
- Tire Pressure Warning Valve
READ NEXT:
Components
COMPONENTS ILLUSTRATION *1 TIRE PRESSURE WARNING ECU AND RECEIVER - - N*m (kgf*cm, ft.*lbf): Specified torque - -
Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during tire
SEE MORE:
ABS Warning Light Remains ON
DESCRIPTION The skid control ECU (brake booster with master cylinder assembly) is connected to the combination meter assembly via CAN communication. If any of the following is detected, the ABS warning light remains on:
The skid control ECU (brake booster with master cylinder assembly) connector
Inspection
INSPECTION PROCEDURE 1. INSPECT REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH (for 2WD) (a) Preparation for check (1) Confirm the standard, high and low positions of the link that will be used in the following inspection.
The standard position is 58° from the maximum link angle (high) and 51° from
© 2016-2026 Copyright www.lexguide.net
