Lexus ES: A25a-fxs Auxiliary Battery
READ NEXT:
Components
COMPONENTS
ILLUSTRATION
*1
AUXILIARY BATTERY
*2
BATTERY HOSE
*3
NEGATIVE AUXILIARY BATTERY TERMINAL
*4
Removal
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization or registration)
that must be performed after parts are removed and installed, or replaced during
Installation
INSTALLATION
PROCEDURE
1. INSTALL AUXILIARY BATTERY
(a) Install the auxiliary battery.
(b) Install the No. 3 battery clamp with the bolt.
Install in this Direction
SEE MORE:
Data List / Active Test
DATA LIST / ACTIVE TEST DATA LIST NOTICE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not. (a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG). (c)
Excessive Brake Pedal Travel (No Fluid Leaks and No Air in System)
CAUTION / NOTICE / HINT NOTICE: After replacing the skid control ECU (brake actuator assembly), perform acceleration sensor zero point calibration and store system information memorization. Click here PROCEDURE 1. PRE-INSPECTION (a) Brake pedal inspection (1) Perform a visual inspection a
© 2016-2026 Copyright www.lexguide.net
