Lexus ES: Vsc Off Switch
READ NEXT:
Components
COMPONENTS ILLUSTRATION *1 INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY *2 VSC OFF SWITCH
Inspection
INSPECTION PROCEDURE 1. INSPECT VSC OFF SWITCH (a) Make sure that there is no looseness at the locking part and the connecting part of the connector. OK: The connector is securely connected.
Installation
INSTALLATION PROCEDURE 1. INSTALL VSC OFF SWITCH (a) Install the VSC OFF switch to the instrument cluster finish panel assembly with the 3 screws. (b) Engage the 2 clamps to install the wire harness.
SEE MORE:
On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. FUEL PUMP ASSEMBLY OPERATION (a) Check fuel pressure. (1) Connect the Techstream to the DLC3. (2) Start the engine. (3) Turn the Techstream on. (4) Enter the following menus: Powertrain / Engine / Active Test / Control the Target Fuel Pressure Offset. Powertrain &g
System Diagram
SYSTEM DIAGRAM Communication Table Transmitting ECU (Transmitter) Receiving ECU Signal Communication Method Main Body ECU (Multiplex Network Body ECU) Multiplex Tilt and Telescopic ECU
IG SW signal
Store command of driver seat memory
Recall command of driver seat memory
A
© 2016-2026 Copyright www.lexguide.net
