Lexus ES: System Diagram
Lexus ES (XZ10) Service Manual / Vehicle Exterior / Exterior Panels / Trim / Grille Shutter System / System Diagram
SYSTEM DIAGRAM
READ NEXT:
System Description
SYSTEM DESCRIPTION GRILLE SHUTTER SYSTEM (a) General description The swing grille actuator assembly receives signals from the ECM, hybrid vehicle control ECU and air conditioning amplifier assembly vi
How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT HINT:
Use these procedures to troubleshoot the grille shutter system.
*: Use the Techstream.
PROCEDURE 1. VEHICLE BROUGHT TO WORKSHOP
NEXT
Initialization
INITIALIZATION CHANGE GRILLE SHUTTER CONTROL MODE AND/OR PERFORM INITIALIZATION (a) In the following situations, it is necessary to change the grille shutter control mode and/or initialize the grille
SEE MORE:
System Diagram
SYSTEM DIAGRAM SYSTEM DIAGRAM Communication Table Sender Receiver Signal Line Radio Receiver Assembly Air Conditioning Amplifier Assembly
Steering wheel heater switch operation condition
Steering wheel heater temperature adjustment switch operation condition
Steering wheel h
Dtc Check / Clear
DTC CHECK / CLEAR CHECK DTC (a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Sliding Roof / Trouble Codes. Body Electrical > Sliding Roof > Trouble Codes (e) Check the details of the DTC(s).
© 2016-2026 Copyright www.lexguide.net
