Lexus ES: System Diagram
Lexus ES (XZ10) Service Manual / Vehicle Exterior / Door / Hatch / Fuel Lid Opener System (for Gasoline Model) / System Diagram
SYSTEM DIAGRAM
READ NEXT:
System Description
SYSTEM DESCRIPTION When the trunk and fuel switch assembly (fuel lid opener switch) is operated, the fuel lid lock with motor assembly to open the fuel lid.
How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT HINT:
Use the following procedure to troubleshoot the fuel lid opener system.
*: Use the GTS.
PROCEDURE 1. VEHICLE BROUGHT TO WORKSHOP
NEXT
Operation Check
OPERATION CHECK CHECK FUEL LID OPENER SYSTEM (a) Push the trunk and fuel switch assembly (fuel lid opener switch) and check that the fuel lid opens.
SEE MORE:
Freeze Frame Data
FREEZE FRAME DATA FREEZE FRAME DATA/INFORMATION (a) Using the Techstream, check the vehicle condition (ECU, sensor) when the brake system operates or a DTC is output. (b) The Freeze Frame Data that is recorded when a DTC is stored can be used to check the INF codes, but only for DTCs which can be st
HO2S Heater Control Circuit Bank 1 Sensor 2 Circuit Short to Battery (P003612,P003614,P005612,P005614,P014118,P016118,P102A9E,P105A9E)
DESCRIPTION Refer to DTC P013611. Click here HINT:
When any of these DTCs are stored, the ECM enters fail-safe mode. The ECM turns off the heated oxygen sensor heater in fail-safe mode. Fail-safe mode continues until the engine switch is turned off.
The heated oxygen sensor heater circuit use
© 2016-2026 Copyright www.lexguide.net
