Lexus ES: System Description
SYSTEM DESCRIPTION
LUGGAGE COMPARTMENT DOOR OPENER SYSTEM DESCRIPTION
(a) If the trunk and fuel switch assembly (luggage compartment door opening switch) is pressed and the luggage compartment door is closed, a luggage compartment door lock assembly open operation signal is sent to the main body ECU (multiplex network body ECU). Then the main body ECU (multiplex network body ECU) unlatches the luggage compartment door.
FUNCTION OF MAIN COMPONENTS
Item | Outline |
Luggage door opening cancel switch assembly | Cancels luggage compartment door opener system operation |
Trunk and fuel switch assembly (Luggage compartment door opening switch) | Turns the luggage compartment door opener system ON/OFF |
Luggage compartment door lock assembly | Opens the luggage compartment door via a signal from the main body ECU (multiplex network body ECU) |
Main body ECU (Multiplex network body ECU) | Receives luggage door opening cancel switch assembly on signal and a luggage compartment door lock assembly open operation signal, and controls the luggage compartment door opener system |
READ NEXT:
CAUTION / NOTICE / HINT HINT:
Use the following procedure to troubleshoot the luggage compartment door opener system.
*: Use the Techstream.
PROCEDURE 1. VEHICLE BROUGHT TO WORKSHOP
OPERATION CHECK BASIC FUNCTION INSPECTION (a) When the trunk and fuel switch assembly (luggage compartment door opening switch) is pressed, check that the luggage compartment door unlatches. (b) While
CUSTOMIZE PARAMETERS CUSTOMIZE LUGGAGE COMPARTMENT DOOR OPENER SYSTEM NOTICE:
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to ma
SEE MORE:
TERMINALS OF ECU CHECK MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY (a) Disconnect the J20 multiplex network master switch assembly connector. (b) Measure the voltage and resistance according to the value(s) in the table below. HINT: Measure the values on the wire harness side with the connector discon
DESCRIPTION The hybrid vehicle control ECU communicates with each sensor and ECU via CAN communication. If any malfunction is detected in a CAN communication circuit, one or more CAN communication system DTCs are stored. DTC No. Detection Item DTC Detection Condition Trouble Area MIL DT
© 2016-2024 Copyright www.lexguide.net