Lexus ES: Steering Angle Sensor
Lexus ES (XZ10) Service Manual / Brake / Brake Control / Dynamic Control Systems / Steering Angle Sensor
READ NEXT:
Components
COMPONENTS ILLUSTRATION *1 STEERING SENSOR *2 SPIRAL CABLE SUB-ASSEMBLY
Installation
INSTALLATION CAUTION / NOTICE / HINT NOTICE: A lock pin is installed to a new steering sensor. Do not remove the lock pin before the steering sensor is installed to the spiral cable sub-assembly. PROC
Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during stee
SEE MORE:
Auxiliary Battery Monitor Module Range/Performance (P058A01)
DESCRIPTION The battery state sensor assembly detects the auxiliary voltage, current and temperature of the auxiliary battery. The battery state sensor assembly calculates State of Charge (SOC) based on the voltage and current of the auxiliary battery and sends it to the hybrid vehicle control ECU.
Installation
INSTALLATION PROCEDURE 1. INSTALL AIR FUEL RATIO SENSOR HINT: Perform "Inspection After Repair" after replacing the air fuel ratio sensor. Click here (a) Using SST, install the air fuel ratio sensor to the exhaust manifold (TWC: Front Catalyst). SST: 09224-00012 Torque: Specified tightening to
© 2016-2026 Copyright www.lexguide.net
