Lexus ES: Shift Paddle Switch
Lexus ES (XZ10) Service Manual / Drivetrain / Ua80e (automatic Transmission / Transaxle) / Shift Paddle Switch
READ NEXT:
Components
COMPONENTS ILLUSTRATION *1 NO. 1 SWITCH WIRE *2 SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY) *3 STEERING PAD SWITCH ASSEMBLY *4 STEERING WHEEL ASSEMBLY *5 SHIFT P
Inspection
INSPECTION PROCEDURE 1. INSPECT SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY) (a) Shift Paddle Switch LH (Transmission Shift Switch Assembly): (1) Measure the resistance according to the
Installation
INSTALLATION PROCEDURE 1. INSTALL NO. 1 SWITCH WIRE HINT: Perform this procedure only when replacement of the No. 1 switch wire is necessary. (a) Engage the 4 guides to install the No. 1 switch wir
SEE MORE:
Ignition Coil And Spark Plug
RemovalREMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during ignition coil assembly or spark plug removal/installation are shown below. Necessary Procedures
Stop Light Control Relay Malfunction (C1380)
DESCRIPTION When any of the following conditions are met, the skid control ECU (brake booster with master cylinder assembly) sets the drive output (STPO) ON which operates the stop light control relay (stop light switch assembly) and turns on the stop lights. Illumination Conditions:
Pre-collisio
© 2016-2026 Copyright www.lexguide.net
