Lexus ES: Reassembly
Lexus ES (XZ10) Service Manual / Vehicle Interior / Mirror (ext) / Outer Rear View Mirror / Reassembly
REASSEMBLY
CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.
PROCEDURE
1. INSTALL VISOR COVER ASSEMBLY
Click here .gif)
2. INSTALL OUTER MIRROR UPPER COVER
Click here
3. INSTALL OUTER MIRROR LOWER COVER
Click here
4. INSTALL SIDE TELEVISION CAMERA ASSEMBLY (w/ Panoramic View Monitor System)
Click here
5. INSTALL OUTER MIRROR COVER ASSEMBLY
Click here
6. INSTALL OUTER MIRROR
Click here
READ NEXT:
Installation
INSTALLATION CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE 1. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY
Components
COMPONENTS ILLUSTRATION *A w/o Panoramic View Monitor System *B w/ Panoramic View Monitor System *1 OUTER MIRROR *2 OUTER MIRROR COVER ASSEMBLY *3 OUTER MIRROR LOWER COVER
SEE MORE:
Removal
REMOVAL PROCEDURE 1. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY Click here 2. REMOVE DRIVE MODE SELECT SWITCH (COMBINATION SWITCH ASSEMBLY) (a) Disconnect the drive mode select switch (combination switch assembly) connector. (b) Disengage the clamp to disconnect the wire harne
Steering Angle Initialization Incomplete (C1694)
DESCRIPTION
This DTC is stored when the parking assist ECU judges that the maximum steering angle has not been memorized (steering angle setting is incomplete).
This DTC is stored when the rear television camera assembly judges that the maximum steering angle has not been memorized (steering an
© 2016-2025 Copyright www.lexguide.net
