Lexus ES manuals

Lexus ES: Rear Package Tray Speaker

READ NEXT:

 Components

COMPONENTS ILLUSTRATION *A for HV Model *B for Gasoline Model *1 REAR DOOR SCUFF PLATE LH *2 REAR DOOR SCUFF PLATE RH *3 REAR SEAT SIDE GARNISH LH *4 REAR SEAT SIDE GARNI

 Inspection

INSPECTION PROCEDURE 1. INSPECT SPEAKER ASSEMBLY WITH BRACKET (a) With the speaker installed, check that there is no looseness or other abnormalities. (b) Check that there is no foreign matter in the

 Installation

INSTALLATION PROCEDURE 1. INSTALL SPEAKER ASSEMBLY WITH BRACKET NOTICE: Do not touch the speaker cone. (a) Install the speaker assembly with bracket with the 4 bolts. Torque: 8.0 N·m {82 kgf·cm,

SEE MORE:

 Dtc Check / Clear

DTC CHECK / CLEAR CHECK DTC (for TIRE PRESSURE WARNING ECU AND RECEIVER) (a) Turn the engine switch off. (b) Connect the Techstream to the DLC3. (c) Turn the engine switch on (IG). (d) Turn the Techstream on. (e) Enter the following menus: Chassis / Tire Pressure Monitor / Trouble Codes. Chassis >

 Open or Short in Steering Angle Sensor +B (C1625)

DESCRIPTION This DTC is stored if the parking assist ECU receives a signal via CAN communication from the steering sensor that indicates a power supply system problem. This DTC is stored if the rear television camera assembly receives a signal via CAN communication from the steering sensor that

© 2016-2024 Copyright www.lexguide.net